LeanClean 360-2

$$$$ $$$$

JENFAB LeanClean 360-2: Rotary Basket Industrial Parts Washers

SKU: LeanClean360-2-JF Categories: ,
General Details

The LeanClean 360-2 model cleans two baskets side by side at the same time. This provides thorough, more efficient cleaning, rinsing, and drying as well as easier loading than baskets which are stacked atop one another.

The Jenfab LeanClean 360-2 is a Front Loading Rotating Basket Parts Washer ideal for general parts washing, cleaning screw machine parts, machined parts, precision stampings and automotive stampings. It also provides critical cleaning of precision parts and orthopedic components. The 360-2 offers the most powerful ultrasonic cleaning action available through its advanced European tubular transducers with digital generators which offer over 95% output, more than what any other type of ultrasonic can provide.

Wash and rinse solution tanks are located below the cleaning chamber. During the cleaning cycles the solutions are filtered and recirculated on a continual basis into and through the cleaning chamber. The baskets rotate in solution as powerful water jets purge the parts with fresh filtered solution. The cleaning chamber is completely purged with fresh filtered solution nearly two times each minute which insures that even the most complex parts with blind holes are cleaned thoroughly. The continuous separation of chips and oil ensures a longer bath life.

The LeanClean 360-2 is designed to process two standard Jenfab baskets 12 x 20 x 8 or two smaller baskets, 12 x 18 x 6. The Jenfab baskets have three times the net volume of the smaller baskets. The chamber can also accept large parts weighing over 250 lbs. with dimensions of 24 x 20 x 8.

One of the most important advantages of the Jenfab LeanClean 360-2 is the baskets are loaded and cleaned side by side. Side by side loading provides better cleaning, rinsing, and drying than stacking baskets on top of one another. In addition to better cleaning and drying, the baskets can be loaded faster and the parts are cleaned and dried faster.

The Jenfab Super Dryer will dry parts other systems cannot. Our 3000 CFM recirculating air flow design dries up to two times faster at lower temperatures and will less energy than regenerative types. Additionally our recirculating design dumps less heat into the plant atmosphere which produces even greater benefits.

Floor Space: 6’W x 7′ D x 7’6″ H
Load Height: 42″ load capacity 300 lbs.
Tank Volume: 200 gallons each Wash, Rinse
Pump Volume: 120 GPM @ 40 PSIG
Dryer Blower: 3000 CFM Recirculating
Tank Heat Wash and Rinse: 15KW up to 160° F
Dryer Heat: 20 KW up to 190° F
Sound Level:
Controls PLC Controlled with OIT / HMI, Diagnosis and Modem
Basket Size: Up to two 12 x 22 x 8″ OR
one 26 x 22 x 8″
Basket Size for 360-2 XL Model: 26″ W x 22″ D x 18″ H
Production Cycles per Hour: Up to 20 stainless baskets over 22 cubic ft./hour
Stainless Steel Tanks, Chamber
Filter Large #2 Bag with quick change swing top head
Chip Collection Baskets (Easy Lift Out)
Fork Lift Pockets
Available Options
  • Ultrasonics 2000 Watts Advanced Tubular Design (25 kHz, 40 kHz, 80 kHz)
  • Higher operating temperatures for solution and dryer heat
  • Oil separation systems
  • Final fresh or DI water rinse cycle
  • Rocking feature for delicate parts
  • Larger work envelope up to 26″ W x 18″ H x 22″ D
  • Automatic loading and uploading


  • Aqueous Heat Treat Washer
  • Aqueous Spray Washer for Engine Components
  • Aqueous Washer for Aircraft Fasteners
  • Cellular Washer for Aircraft Filters
  • Precision Cellular Cleaning Aerospace Bearings

Bearing industry

  • High Capacity Drum Washer
  • Inline Mini Drum Washer
  • Lean Cellular Washer with Ultrasonics
  • Mid-Size Drum Washer
  • Vertical Agitation Immersion Cleaning

Bio medical

  • Cellular Ultrasonic Washer for Orthopedic Implants
  • Cellular Washer for Disposable Bio Med Components
  • Inline Ultrasonic Cleaning Glass Tubes

Machined Parts

  • Cellular Cleaning Brass Valve Components
  • Central Cleaning Electronic Screw Machine Parts
  • Centralized Washing Screw Machine and Stamped Parts
  • Inline Parts Cleaning
Information Enquiry

Information Enquiry: JENFAB-LeanClean 360-2

Your Name (required)

Your Email (required)

Your Company (required)

Your Telephone Number


Your Message

Security check: