DELTA 6000

Universal Pressure Tester for Heads and Blocks

SKU: Delta-6000-D Categories: ,
General Details

The rebuilding industry’s most practical, truly Universal Pressure Tester.

Efficiency by design:

  • All side and end ports are sealed quickly and effectively with universal closure devices unique cradle lifting system for applying plenty of sealing pressure fully adjustable jack posts accommodate all shapes of cylinder heads, wedge, parallel and overhead cam. Can easily compensate for thickness differences.
  • Jack post are fully adjustable to accommodate all shapes of cylinder heads, wedge, parallel and overhead cam. Heads are measured outside of the frame and the jack posts can be pre-set easily in the frame to accept any automotive or diesel head up to 7- 1/8″ thick, with our cylinder head thickness gauge. It can also be adjusted to compensate for heads that are not always parallel. The jack post support heads either through head bolt holes on V-6 and V-8’s, or with parallel bars for parallel heads and overhead cam heads with cam towers with bars length ways and diesel heads with bars crossways
  • Small pieces of neoprene are placed over water holes to cover any variations of size and shape of holes. Then enclosure bars of different widths and lengths are placed on neoprene pads. Strong back cross bars slide horizontally within the frame compressing neoprene enclosure pads evenly when cam-lever is pulled, providing for solid clamping without further adjustments.
  • Both ends and both sides can be closed off at the same time using J-brackets hanging from side bars and sliding top bars. Water or air enclosures may be placed on ends, sides or surface with this method of pressure testing. This method allows you to test with air to 60 lbs or water to 100 lbs without leaking. A standard accessory storage cart will be provided to store all the parts.

Features
  • Jack post height is easily pre-set in the frame with our cylinder head thickness gauge.
  • Heads are measured outside the frame and post height quickly adjusted to accept any automotive or diesel head up to 7- 1/8” thick.
  • Fully adjustable jack post supports can be adjustable to compensate for heads that are not always parallel.
  • Heads are supported either through head bolt holes on V-6 and V-8’s, or with parallel bars for parallel heads, with bars length ways for overhead cam heads with cam towers, with bars cross ways for diesel heads.
  • Small pieces of neoprene are placed over water holes to cover any variations of size and shape of the holes.
  • Enclosure bars of different widths and lengths are then placed on the neoprene pads. Optional plates are available for purchase.
  • Strong back cross bars slide horizontally within the frame compressing neoprene enclosure pads evenly when camlever is pulled, providing for solid clamping without further adjustments.
  • Both ends and both sides can be closed off at the same time using J-brackets hanging from side bars and sliding top bars.
  • Water or air enclosures may be placed on ends, sides or surface with this method of pressure testing.
  • This method allows you to test with air to 60 lbs or water to 100 lbs without leaking.
Specifications

Specifications:

Model

Head Capacity

Internal Width

Delta 6000 with Side Port Kit and Tray

18” X 48” X 7”

18”

 

Shipping Information:

Standard Large
Overall Height 36½”
Overall Width 49”
Overall Depth 33”
Weight (lbs) 600
Weight (kg) 273
Optional Accessories
  • Endroll Over Fixture – allows for rotation to vertical position.
  • Extension kit – can be used to test larger heads.
  • Custom plates – for various heads on our list.
  • Block kit – to test blocks
Information Enquiry

 

Information Enquiry: Delta Custom Tools – Delta 6000


Your Name (required)

Your Email (required)

Your Company (required)

Your Telephone Number

Subject

Your Message

Security check: